Tempsi Base

tempsi_base_emo
TEMPSI BASE - Cement-bonded particle panels for wide range of construction purposes

 

 

MANUFACTURING OF CONSTRUCTION PANELS

Cement bonded particle panels with smooth cement-gray surface are manufactured by compressing wooden particles (62%) and cement (25%), adding water (10%) and other hydration additives (2%) in a certain sequence. Coating the wooden particles with cement gives the panels its strength and also mould-, insect- and fire resistance. Tempsi Base panel is an environmentally friendly product.

DIMENSIONS OF CONSTRUCTION PANELS

Maximum dimensions of Tempsi Base facade and construction panels are 1250x3350mm. Thickness can vary from  8-40 mm. Standard thicknesses are 8, 10, 12, 16 and 24 mm.

If needed the construction panels can be drilled and cut to specific dimensions according to the specification provided by the client. Edges of the construction panels thicker than 16 mm can be chamfered

COLOR PALETTE OF CONSTRUCTION PANELS

Tempsi Base facade and construction panels can be primed and painted according to the specification provided by the client. The Primer improves adhesion for finishing paint and durability of the construction board.

AREA OF USE

  • - Internal and external walls
  • - Sub-floors
  • - Facades
  • - Roof construction
  • - Balcony railings
  • - Foundation cladding
  • - Fire resistant walls
  • - Private houses
  • - Hobby construction

                                                           

 

picture_160_2

Completed projects gallery

 

Detailed information for Tempsi Base construction panel

Useful accessories

                

➠ Screws & rivets

Corner & joint profiles

Joint tape 

 

 

 

PROCESSING OF CONSTRUCTION PANELS

  • - For cutting of Tempsi Base construction boards it is necessary to use a circular saw.
  • - Circular saw bench provides a smooth, accurate and straight cut.
  • - Construction panels must be cut from treated side to prevent damage to the surface finish of the building panel.
  • - When using Tempsi Base construction panels in outdoor conditions, edges which have been cut must be primed.
  • - For easier installation of Tempsi Base panels, holes must be pre-drilled.
  • - When drilling Tempsi Base panels a stone or metal drill bit must be used.
  • - Tempsi Base panels must be drilled from the treated side of the panel to avoid damage to the surface finish.
  • - Tempsi Base panels can be fastened to the substructure with screws or rivets.
  • - Use stainless steel screws and rivets with watertight washers.
  • - Use only proper screws and rivets recommended by our specialists.

 

For additional information please contact our specialists.

 


ecofriendlylogo2